Both of these keypads have the same operating procedures. This section discusses the keypad's visual indicators and the use of its keys. An alarm has occurred on the indicated zone. Page 12 User Manual Your System Remember, fire protection and the protection offered by the keypad's emergency keys are always armed and always available.
If your system is equipped with environmental protection e. Page Full Arming And Home Arming A delay period was chosen during your system's installation to provide suitable time to allow for your entry and exit.
Which when used, will disarm the system in the regular manner, while simultaneously transmitting a silent alarm to the central station.
Your Orbit-6 offers two methods of Bypassing: Quick Bypassing Quick Bypassing achieves the result by pressing the key number corresponding to the zone to be Code Bypassing bypassed for 2 seconds.
Note that it is impossible to delete the Master Code although it can be changed. Secure or bypass the violated zone s and then proceed. Code To bypass such a zone s and cause it to be ignored by the system, enter the following sequence correctly If the system is programmed for quick bypass the following option is available: Quick To bypass a zone simply press the corresponding keypad number for at least 2 seconds.
Bypass An additional zone s can be bypassed at the same time by adding its number to the sequence. Example: if your code is your duress code is If your user code is your duress code is Note: Under no circumstances must the Duress Code be used haphazardly or without reason.
Page Section 5: System Sounds Section 5: System Sounds Besides the visual indications provided by your keypad s , your system is designed to produce audible annunciation after certain events. Depending on the circumstance, such sounds may be made by your system's keypad s , its external sounder e. By entering the User Functions mode, a number of options become available which determine how your alarm system operates, such as: adding, modifying, and deleting User Codes bypassing zones displaying a "memory" Page Section 7: System Troubles If not remedied quickly, a trouble condition will likely compromise your system and prevent it from properly doing its job.
If so, to determine the problem, perform the sequence on the following page. Check that your telephone line is functioning. Check to see if your external bell has been tampered with. If the problem still exists contact your dealer. The following steps are recommended by the National Fire Protection Association NFPA and can be used as a guide when establishing a similar plan for your circumstances. Page 32 Notes User Manual This manual is also suitable for: Rp See Figures 1A and 1B on page 32 and The programmer can store up to 10 Orbit-6 programming sets and copy it directly to the panel.
The programmer supports both the Orbit-5 and Orbit-6 panels. If improper data is found, it must be corrected in order to obtain the desired system response. The data in a location can either be a number from or a letter from A-F. As soon as a location is accessed, the first digit is displayed automatically. Additional digits if they exist can be displayed by pressing the following keys: Used to display the next digit in a location containing at least two digits; Enable the option of resetting the system to the factory defaults.
Disable the option of resetting the system to the factory defaults. The U0 remains active latched while the system is armed. When disarming the system the U0 deactivates unlatches. U0 is deactivated when the system is disarmed. The UO deactivates either when arming the system or disarming the system due to an alarm that was activated from the emergecy keypad keys, hour zone violation or tamper zone violation.
Follow Chime Pulse Ver. To change a code, enter a new code according to the type of event — see page 30 to the corresponding location. CS 1 Phone No. Page 35 Notes Installer Manual Page 36 Installer Manual Because Seller does not install or connect the product and because the product may be used in conjunction with products not manufactured by the Seller, Seller can not guarantee the performance of the security system which uses this product.
This manual is also suitable for: Rp Print page 1 Print document 37 pages.
0コメント