Hack someone ip

What if your IP address ends up in the wrong hands? Just by knowing your IP address, nobody can harm you. However, they can start to scan your PC and see if you have vulnerabilities they can use to gain access to your data. We will get to that later. In the following section, we are going to cover an out-of-the-box technique.

However, it relies on a simple principle: your victim needs to send you some traffic. If he does that, boom, you have his IP address. We will see how to see it. The Internet is full of poor content about hacking IP addresses. You might read about hacking IP addresses with Skype and get excited about that, but since this is not possible anymore.

So, for this article, we are going to use the best way to hack an IP address. We are going to use the only way that depends uniquely on you, not third-party services. Because of that, it will always work. The idea behind our technique is simple. You basically give your victim a link : they can open it with their mobile, PC, or any sort of device. On that link, they will see an image of your choice we recommend using a fun one. However, your system will also track automatically their IP address and more information, like the browser they are using and their operating system.

While this happens, they will see the fun image and have a laugh about it. They have no way of knowing that you are tracking their IP address. You want to give your victim a valid link to click, and it must be valid online. Therefore, we need to register a website. There are a lot of free services online to register a website, and among them, we have chosen x10 hosting. Go to their website and register a new account.

As a first thing, they will ask you to select a domain image. Use a credible one for the kind of images you want to share. Continue with the registration and verify your email. Once you complete the process, you will end up on the homepage where you will have to create a website. Until now, we created the name. Now, we have to prepare the software running behind it. The home will look like the one below. From there, just click the green Add Website button on the top right.

A quick wizard will open. From there, we have to tune a few items. Then, as a website name, write something that reminds the website, like its domain name. As the last thing, leave the address path empty. Then, click on Add Website.

Congratulation, we are almost there! Now your website is ready. All we need to do is uploading the script that will take care of saving IP addresses and delivering the images to the user. Our IPFinder script comes in a useful zip package that you can download for free by using the link below.

Just click on it and download the zip file. We will do that on the website directly: move on to the next step. From the website pages, select the File Manager option. This will open a new window that looks similar to Explorer in Windows. A website is just a collection of files on a public server. With this File Manager , you can have a look at those files.

To them, we need to add our script. Once you are in the file manager, select Upload 1. Select that compressed file ipfinder. Then, close this window and click Reload 2 in the previous window. This is our zipped package containing IPFinder, and we just need to extract it.

Select the ipfinder. Then, from the top menu, select Extract. A new window will pop-up. Just click on Extract File s without changing anything. Then, wait for the process to finish, and, as soon as it does, click the Close button.

You will have some more files and folders on your list. At this point, I recommend you to delete the ipfinder. So, just click it and then click the delete button at the top. This step is not mandatory, but it is a good practice.

Our IPFinder comes without images. However, it is a script that shows an image and logs the IP of the viewer. Therefore, you need to add your own images.

So, find a jpeg image that you think would work for this purpose. Once you have that image, rename it with a simple name without spaces. Then, double-click on the images folder to view its content. Once you are in, you will see only a. For example, we will be using an image named meme.

Now your IPFinder is ready to go. How do we use it? It is very simple, as it automatically creates the URL we need. Your URL to share with your victims will be something like this one. IPFinder will save a new text file for each victim that sees the image in the log folder. That file contains the date, time, and the User ID you specify. The purpose of this field is to let you differentiate between users. Think about it, what if you want to give the link to multiple people?

How can you know which IP corresponds to which person? You cant. They will both see the same picture, but you will log their IPs separately. Browse the log folder. You will see some text files with the names explained above. Open any of them and read their content select it and click Edit. In each, you will see something like this. Note that for privacy we have hidden some parts of the IP address and some parts of the browser info in this example.

However, from your script, you will get the entire IP address and the full browser information. At this point, you have your IP finder in place. You shared some images, thus getting some IP. You can know truly hack IP addresses, but you are still wondering what can someone do with IP addresses. On the other hand, you might be the one who believes to be hacked, and you want to know if you are in real danger. Look no further, here we will tell you the ultimate truth about what happens after you hack IP addresses.

A lot of self-proclaimed hackers hack IP addresses just to scare people. They contact the person and tell them they know their IP address, and maybe their browser. A normal PC user will believe they have accessed their PC, how would they know which browser they use otherwise? So, people get scared and start believing in the hacker.

They basically make them believe they had access to their data and threatened to share some personal pictures or something like that.

However, they approached everyone with the same words. As a result, they would scare the hell out of anyone holding such kind of pictures.

Of course, such activity is illegal. The location will be a few square kilometers accurate in urban areas, and a few dozens square kilometers accurate in rural areas. This is a rule of thumb and might vary, but you will be never accurate enough. Only your service provider , and thus the police, can locate you precisely with your home address.

For the others, you need to get by with only knowing the city or county. If someone knows your IP address, he can scan you. This means he can try to detect the system you are running and your vulnerabilities. Now, since the public IP address of yours is on your home router, they will do that for your router.

They will gain access to your router and, from that, they will adopt the same approach to gain access to your PC. ClevGuard Store.

Installing the Licensed Software onto the device you do not possess monitoring rights may go against the Laws of your country or region. Please consult your own legal advisor for professional opinions on the legality of using this Licensed Software in the way you intend to use.

You take full responsibility for downloading, installing, and using it. ClevGuard shall not be responsible if you choose to monitor a device without being permitted to; nor can ClevGuard provide legal advice on the use of the monitoring software.

All rights not expressly granted herein are reserved to and retained by ClevGuard. If you don't want to install the app, try our remote iPhone monitoring solution. Mac monitoring tool is coming soon! Thanks for your participation.

We will email you the first time when Mac monitoring software is launched. By the way, don't miss the other powerful products ClevGuard offers. Sign Up Free. Sign Up. Top 5 Hot Articles. Megan Evans Updated: May 17, pm. Is it possible to hack someone's computer by knowing their IP address?

So, how to hack another computer using IP address? It is discussed in the part below. After the work is done, you will be notified. The guide will let you know how to install and activate the software correctly. What Can MoniVisor do for You on Computer Hacking MoniVisor is an excellent app and it is equipped with unprecedented numbers of functions for monitoring. Internet activity tracking All internet activity on browser will be tracked. Intercept and read both sent and received emails All the sent and received emails on Gmail, Yahoo, and Outlook will be monitored.

Automatic screenshot of target computer remotely The software takes screenshots every 15 seconds for 5 minutes automatically. App activity tracker Track all the usages about the apps being used on the target computer. Login activity monitoring Each login activity is recorded and time-stamped.

Printing activity monitoring Every print command carried out on the computer will be tracked. Summary By here, you must have already know that hacking a computer through the IP address is not recommended. By Megan Evans A certified content marketing specialist with great passion for Internet and online safety. Click to rate this post Generally rated 4. You have already rated this article! All rights reserved. Help Me Choose. Help me choose. Step 1 I want to Know if I am being monitored.

Keep track of my loved ones. Step 2 The target I want to monitor is using Android Samsung, Huawei, Oppo, Google, etc. Windows computer. Mac computer. Confrim your monitoring needs here. I prefer to focus on WhatsApp monitoring. I prefer monitoring everything on the target Android phone.

Social apps, location history, phone files, etc. I prefer to ensure the safety of my kids' online activities and create screen time balance. The results are in. Track WhatsApp calls, even any missed ones. Record and playback WhatsApp calls. Download all WhatsApp compatible files. Take screenshots when WhatsApp's in use. Take Me There. Track real-time locations. Access phone files like SMS and call logs. Record the target's phone calls.

Capture auto-screenshots. Take secret photos using remote camera. KidsGuard Block inappropriate websites, social or game apps, etc. Track kids in real time and view their location history.

Filter scams or other messy phone calls. Receive detailed online activity reports. I can meet the following conditions I own a computer and can access the target iPhone.

I know the iCloud account and password of the target iPhone. Neither condition can I meet. Read all sent or received text messages. Track all incoming and outgoing calls. Access multimedia files and text files. Check Safari history and bookmarks. Check Photos, Videos, Contacts, Calendar,etc. Access everything stored in the target's iCloud Drive. Monitor an iPhone without being detected. No app installation at all. Back OK. Monivisor for Windows Monitor web-based social media conversations.

Take automatic screenshots on the computer screen. View every keystroke typed on the keyboard. The Mac monitoring software is coming soon. Submitted Successfully!

Step 2 I own the following devices